A two‐dimensional (2D) carbon nanofilm with uniform artificial nanopores is an ideal material to ultimately suppress the fuel permeation in the proton exchange membrane fuel cells. Graphdiyne has great mechanical strength, high dimensional stability, and controllable nanopores, and has good prospects to play this crucial role. It is found that graphdiyne nanofilm with amino groups and natural nanopores can be easily prepared with high integrity. The aminated graphdiyne has good compatibility with the Nafion matrix owing to the acid–base interaction between them. The excellent comprehensive properties of graphdiyne in selectivity, dimensional stability, and integrity effectively improve the power performance and stability of fuel cells at wide temperature. Our results can be developed into a universal method that can easily realize the selective separation of ions and small molecules, and open a new way for the emerging applications in green energy. 相似文献
Artificial humic acids (A‐HA) made from biomass in a hydrothermal process turn otherwise highly insoluble phosphates (e.g. iron phosphate as a model) into highly available phosphorus, which contributes to the fertility of soils and the coupled plant growth. A detailed electron microscopy study revealed etching of the primary iron phosphate crystals by the ‐COOH and phenolic groups of humic acids, but also illustrated the importance of the redox properties of humic matter on the nanoscale. The combined effects result in the formation of then bioavailable phosphate nanoparticles stabilized by humic matter. Typical agricultural chemical tests indicate that the content of total P and directly plant‐available P improved largely. Comparative pot planting experiments before and after treatment of phosphates with A‐HA demonstrate significantly enhanced plant growth, as quantified in higher aboveground and belowground plant biomass. 相似文献
The fundamental understanding of the subtle interactions between molecules and plasmons is of great significance for the development of plasmon‐enhanced spectroscopy (PES) techniques with ultrahigh sensitivity. However, this information has been elusive due to the complex mechanisms and difficulty in reliably constructing and precisely controlling interactions in well‐defined plasmonic systems. Herein, the interactions in plasmonic nanocavities of film‐coupled metallic nanocubes (NCs) are investigated. Through engineering the spacer layer, molecule–plasmon interactions were precisely controlled and resolved within 2 nm. Efficient energy exchange interactions between the NCs and the surface within the 1–2 nm range are demonstrated. Additionally, optical dressed molecular excited states with a huge Lamb shift of ≈7 meV at the single‐molecule (SM) level were observed. This work provides a basis for understanding the underlying molecule–plasmon interaction, paving the way for fully manipulating light–matter interactions at the nanoscale. 相似文献
Aiming to obtain the more effective pathogen inhibitive ingredients and explore the influence of introducing different heterocyclic units to carvacrol and thymol esters, twenty ester derivatives with different heterocyclic units were synthesized. And the in vitro antifungal activity of title compounds against five plant pathogenic fungi was evaluated by mycelium growth rate method. The results showed that some carvacrol and thymol esters showed good to excellent antifungal activity, and compound 9d (4-bromo-5-isopropyl-2-methylphenyl picolinate) exhibited a broad antifungal spectrum. Preliminary study indicated that the introduction of furan, thiophene and pyridine unit could enhance the antifungal activity of carvacrol and thymol esters against Botrytis cinerea and a bromine atom on the para position of benzene moiety could enhance their antifungal activity. 相似文献
Spirocyclic compounds such as 9,9′-spirobifluorene (SBF) are becoming more and more attractive for use as host materials in organic optoelectronic devices. Herein, two dispirocycles, namely, dispiro[fluorene-9,9′-anthracene-10′,9′′-fluorene] and 10,10′′-diphenyl-10H,10′′H-dispiro[acridine-9,9′-anthracene-10′,9′′-acridine], were used for the construction of host materials 1 – 4 . The attached triphenylamino group determines the thermal, photophysical, electrochemical, and charge-transport properties, and therefore they have different electroluminescent performances. The device based on dispiro[fluorene-9,9′-anthracene-10′,9′′-fluorene] ( 2 ) and 10,10′′-diphenyl-10H,10′′H-dispiro[acridine-9,9′-anthracene-10′,9′′-acridine] ( 3 ) molecular platforms exhibited external quantum efficiencies of greater than 21 % with a very high power efficiency (≈100 lm W−1). These results demonstrate the potential of extending the application of dispirocyclic molecular platforms with inherent rigidity for developing highly efficient host materials for organic light-emitting diodes. 相似文献
To optimize the cycle life and rate performance of lithium-ion batteries (LIBs), ultra-fine Fe2O3 nanowires with a diameter of approximately 2 nm uniformly anchored on a cross-linked graphene ribbon network are fabricated. The unique three-dimensional structure can effectively improve the electrical conductivity and facilitate ion diffusion, especially cross-plane diffusion. Moreover, Fe2O3 nanowires on graphene ribbons (Fe2O3/GR) are easily accessible for lithium ions compared with the traditional graphene sheets (Fe2O3/GS). In addition, the well-developed elastic network can not only undergo the drastic volume expansion during repetitive cycling, but also protect the bulk electrode from further pulverization. As a result, the Fe2O3/GR hybrid exhibits high rate and long cycle life Li storage performance (632 mAh g−1 at 5 A g−1, and 471 mAh g−1 capacity maintained even after 3000 cycles). Especially at high mass loading (≈4 mg cm−2), the Fe2O3/GR can still deliver higher reversible capacity (223 mAh g−1 even at 2 A g−1) compared with the Fe2O3/GS (37 mAh g−1) for LIBs. 相似文献
Designs, Codes and Cryptography - For a long time, the literature has demonstrated that designs and codes are exciting topics for combinatorics and coding theory. Linear codes and t-designs are, in... 相似文献
Journal of Applied Spectroscopy - A multi-ion chromogenic sensor based on a terpyridine moiety was developed for the semiquantitative, visual, and sensitive speciation analysis of Fe2+ and Co2+... 相似文献
A quick and effective workflow based on ultra‐performance liquid chromatography coupled with electron spray ionization and LTQ‐Orbitrap mass spectrometry (UPLC‐LTQ‐Orbitrap MS) was established for compositional analysis and screening of the characteristic compounds of three species of Atractylodes rhizome for quality evaluation. This technique was employed to determine the seven main components in Atractylodes rhizome samples. Ultimately, 78 constituents were identified; of these, seven characteristic compounds were selected for species discrimination, comprising atractylodin (63), atractylenolide I (43), atractylenolide II (49), atractylenolide III (53), atractylon (69), methyl‐atractylenolide II (54) and (4E,6E,12E)‐tetradecadecatriene‐8,10‐diyne‐1,3‐diacetate (59). The seven main compounds, including six characteristic compounds, were simultaneously determined in 29 batches of Atractylodes rhizome samples. Thus, the method validation showed acceptable results. Quantitative analysis showed significantly different contents of the seven main components among the three species of Atractylodes rhizome, which indicates possible distinctions in the pharmacological effects. This established method can simultaneously provide qualitative and quantitative results for compositional characterization of Atractylodes rhizomes and for quality control. 相似文献
This study seeks to investigate the removal efficiency of particulate matter (PM) from the actual diesel exhaust at various reaction temperatures by using non-thermal plasma (NTP). The effect of the reaction temperature on removal efficiency was reflected by the change in the concentration of particles in different modes and the weight fraction of volatile organics in PM. The Arrhenius equation was used to determine the apparent activation energies Ea of the soot in PM. In addition, the difference in the oxidation reaction at various reaction temperatures and the effect of NTP on the properties of PM were discussed. After considering the decreasing ranges of the total concentration and the weight of the PM, it was determined that 120 °C is the optimal temperature choice for PM removal. The decreasing range of the total concentration reached 57.13% and 66.79% of PM was removed when the PM is measured by weight. NTP has better effect on the removal of smaller particles. The weight fraction of the volatile fraction markedly decreases after the reaction and the apparent activation energy of soot noticeably decreased. The oxidizability of the excited species in NTP was enhanced with the increase of the reaction temperature. However, the excited species concentration declined concurrently, resulting in the occurrence of the optimized range of reaction temperature. The particles were removed by the oxidation that occurred on the surface of the primary particle and the disintegration of the structure of the particles.